Asset Integrity & Repair Solutions
Inspection shows where an asset is at risk. Through our joint venture partnership, NNDT now also offers the engineered repair, leak sealing, leak detection and valve services that turn those findings into fixes, designed to international standards and, in most cases, installed while the plant keeps running.
NDT, specialised inspection and leak detection find the defect
Engineering assessment and repair design
Composite repair or live leak sealing on site
Quality control, records and guarantee
shutdowns — repairs on live, pressurised systems
design life for composite repairs
composite operating temperature range
quote turnaround on repair enquiries
COMPOSITE (FIBRE-WRAP) REPAIR
Engineered carbon-fibre and composite systems reinforce damaged pipelines, tanks, vessels and flanges to the strength of the original material. Applied by hand lamination or infusion, they are cost-effective, durable and quick to install with no limit on pipe diameter. Every repair is designed to ASME PCC-2 and/or ISO/TS 24817 and signed off by a professional engineer.
| Composite Grade | Standard | Medium Temperature | High Temperature | Very High Temperature |
|---|---|---|---|---|
| Operating temperature | −60 to 84 °C | −50 to 109 °C | −50 to 211.8 °C | −50 to 232 °C |
| Set time at 25 °C | 4 hours | 4 hours | 14 hours | 20 hours |
| Repair design life | 20 years | 20 years | 20 years | 20 years |
Engineered leak-sealing clamps, manufactured to ASME Section VIII Div. 1, stop active high-pressure leaks without shutting down or isolating the system. A low-profile design allows a composite overwrap as the permanent repair. Suitable for oil, gas, mining, petrochemical and water service.
| Clamp Specification | Value |
|---|---|
| Design pressure / temperature | 200 bar / 300 °C |
| Pipe diameter | 1" to 56" |
| Maximum defect | 25 mm |
| Installation | about 10 minutes, one person |
| Applications | Elbows, straights and welds; pinholes, through-wall corrosion |
| Step | What Happens |
|---|---|
| 1. Assess | The client describes the anomaly on an engineering assessment form; inspection data from NNDT supports it. |
| 2. Design | Repair recommendation and design calculations to ASME PCC-2 / ISO/TS 24817, signed off by a professional engineer. |
| 3. Supply | Materials supplied to the design calculations for each repair. |
| 4. Install | Installation and quality control by qualified installation engineers. |
| 5. Guarantee | Quality-control records reviewed and the repair guaranteed. |
Three complementary technologies locate losses quickly — without digging blindly or shutting down.
Satellite imagery and AI narrow a water network down to small, prioritised zones. About 80% of leaks are found in 20–30% of the network; first results in about 2 weeks.
Free-floating multi-sensor devices travel inside live pipelines from 2" — any material, including unpiggable lines — reporting wall condition, deposits and leaks.
Acoustic sensors along the line, combined with AI, triangulate leak positions from sound-wave time delays for precise, focused repairs.
An 823 mm internal corrosion defect on a buried line, wrapped with an engineered composite to ISO/TS 24817 in about 3 days — no shutdown, 20-year guarantee.
Competitor valves failed in under 3 weeks on highly erosive slurry. Heavy-duty knife gates with duplex blades ran for 12 months continuously.
Satellite detection and an in-line run inside the live pipeline found 17 unknown leaks; repairs within two weeks, payback in under two months.
Severe internal corrosion and a pinhole repaired with impact-resistant composite in six sections — zero downtime.
A 9 000 mm internal corrosion defect spiral-wrapped over 9.3 m to ASME PCC-2 in about 5 days, with no shutdown.
Two DN900 valves sourced and delivered for a critical intervention about 105 days earlier than planned.